Curriculum Vitae






Chloé Arson

Associate Professor
Geosystems Engineering
Mason 2283
404/385-0143




Biography

I am a theoretical and numerical expert in damage and healing rock mechanics, thermo-chemo-poromechanics, and underground storage. My group designs and formulates models that link microscopic damage and healing processes to macroscopic rock behavior. For example, we explain how salt grain sliding mechanisms can result in crack propagation and how diffusive mass transfer at grain interfaces can actually heal these cracks. We study crack propagation at multiple scales, in shale for instance, and how crack patterns affect rock strength, stiffness and permeability. We also use principles of micro-mechanics and thermodynamics to understand fragmentation processes in granular assemblies - ballast for example. Recently, I got involved in the NSF-funded Engineering Research Center for Bio-mediated and 

Education

  • 2006-2009: Ph.D. studies in the geotechnical group of Navier Laboratory (CERMES), at École Nationale des Ponts et Chaussées (ENPC, France). Ph.D. Advisor: Professor B. Gatmiri.
  • 2005-2006: Master of Science in Soil and Rock Mechanics and Environmental Geomechanics, from École Nationale des Ponts et Chaussées (ENPC), Ecole Centrale Paris and Paris VI University (P. & M. Curie University).
  • 2002-2006: Civil Engineering degree from École Nationale des Ponts et Chaussées (ENPC), leading Engineering school in Europe.
  • Spring 2003: Three-month research training internship at the Lehrstuhl für Baustatik und Baudynamik in the Rheinish Westfälischen Technischen Hochschule Aachen (LBB, RWTH, Aachen, Germany).
  • 2002-2003: Second-year academic degree of philosophy, Paris I University (Diplôme d’Études Universitaires Générales).

Research Interests

  • Constitutive Modeling: damage and healing in rock, influence of microstructure on macroscopic rock properties, thermo-hydro-chemo-mechanical couplings in porous media
  • Numerical Modeling: Finite Element code development in laboratory-owned programs (in Fortran), implementation of new subroutines in commercial software (ANSYS, ABAQUS, PFC3D), algorithms for the validation and calibration of damage models (MATLAB)
  • Geomechanical Applications: deep geological storage (nuclear waste disposals, carbon dioxide sequestration, high-pressure gas storage), shallow geothermal systems, hydraulic fracturing, ground improvement by jet-grouting, scour and erosion, ballast particle crushing
  • Other Applications: retention properties of cracked cement paste, strength properties of damaged teeth repaired by resin injection

Honors

  • Adjunct Courtesy Appointment, School of Earth & Atmospheric Sciences, Georgia Tech, 2014-2017
  • “Future Leaders Program” Membership, ARMA, 2013
  • “Class of 1969” Teaching Fellowship, Georgia Tech, 2013-2014
  • ExCEEd Teaching Fellowship, ASCE, 2012 (“Excellence in Civil Engineering Education”).
  • ENHANCE Fellowship, NSF, 2012 (“Enhance the Career of Female Faculty in Earthquake Engineering Research”)

Awards

  • Georgia Tech CEE Inter-disciplinary Research Award, 2017
  • NSF CAREER Award, 2016
  • Ph.D. Prize, ALERT Geomaterials, 2010 (Alliance of Laboratories in Europe for Research and Technology)
  • Ph.D. Special Prize, Ecole Nationale des Ponts et Chaussées, 2010 (ENPC, France)

Articles

  1. W. Jin, C. Arson, 2019. Fluid driven transition from damage to fracture in anisotropic porous media - a multiscale XFEM approach, Acta Geotechnica, (accepted).
  2. P. Wang, Z. Karatza, C. Arson, 2019. DEM modelling of sequential fragmentation of zeolite granules under oedometric compression based on XCT observations, Powder Technology, DOI: 10.1016/j.powtec.2019.02.050
  3. X. Shen, C. Arson, 2019. Simulation of salt cavity healing based on a micro-macro model of pressure-solution, Petroleum Geoscience, DOI:10.1144/petgeo2018-094
  4. X. Shen, C. Arson, 2018. An isotropic self-consistent homogenization scheme for chemo-mechanical healing driven by pressure solution in halite, International Journal of Solids and Structures, DOI: 10.1016/j.ijsolstr.2018.11.010.
  5. W. Jin, C. Arson, 2018. Anisotropic nonlocal damage model for transversely isotropic materials, International Journal of Solids and Structures, DOI: 10.1016/j.ijsolstr.2018.01.020.
  6. P. Wang, C. Arson, 2017. Energy distribution during the quasi-static confined comminution of granular materials, Acta Geotechnica, DOI: 10.1007/s11440-017-0622-5.
  7. A. Pouya, C. Zhu, C. Arson, 2017. Self-consistent micromechanical approach for damage accommodation in rock-like polycrystalline materials, International Journal of Damage Mechanics, DOI: 10.1177/1056789517747665.
  8. W. Jin, C. Arson, 2017. Nonlocal enrichment of a micromechanical damage model with tensile softening: advantages and limitations, Computers and Geotechnics, DOI:10.1016/j.compgeo.2017.09.011
  9. R. Kirkman, C. Arson, L. Stewart, R. Harris, A. Francis, 2017. The risks of hydraulic fracturing and the responsibilities of engineers, Elementa: Science of the Anthropocene, DOI: https://doi.org/10.1525/elementa.218
  10. W. Jin, C. Arson, 2017. Micro mechanics based discrete damage model with multiple non-smooth yield surfaces: theoretical formulation, numerical implementation and engineering applications, International Journal of Damage Mechanics, DOI: 10.1177/1056789517695872
  11. W. Jin, C. Arson, 2016. Discrete Wing Crack based Damage Model for Brittle Solids, International Journal of Solids and Structures, DOI: 10.1016/j.ijsolstr.2016.12.025
  12. H. Xu, S. Busetti, C. Arson, 2016. Fracture-­Induced Anisotropy of the Stress‐Strain Response of Shale at Multiple Scales, ASCE International Journal of Geomechanics, DOI: 10.1061/(ASCE)GM.1943-5622.0000897
  13. C. Zhu, A. Pouya, C. Arson, 2016. Prediction of viscous cracking and cyclic fatigue of salt polycrystals using a joint-enriched Finite Element Model, Mechanics of Materials, DOI: 10.1016/j.mechmat.2016.09.004
  14. W. Jin, H. Xu, C. Arson, S. Busetti, 2016. A Multi-Scale Computation Tool Coupling Mode II Fracture Propagation and Damage Zone Evolution, International Journal of Numerical and Analytical Methods in Geomechanics (accepted)
  15. M. Sanchez, C. Arson, A. Gens, F. Aponte, 2016. Analysis of Unsaturated Materials Hydration Incorporating the Effect of Thermo-Osmotic Flow, Geomechanics for Energy and the Environment (accepted)
  16. S. Le Pense, C. Arson, A. Pouya, 2016. A fully coupled damage-plasticity model for unsaturated geomaterials accounting for the ductile - brittle transition in drying clayey rocks, International Journal of Solids and Structures, DOI:10.1016/j.ijsolstr.2016.04.007
  17. P. Wang, C. Arson, 2016. Discrete Element Modeling of shielding and size effects during single particle crushing, Computers and Geotechnics, DOI: 10.1016/j.compgeo.2016.04.003
  18. A. Pouya, C. Zhu, C. Arson, 2015. Micro-Macro Approach of Salt Viscous Fatigue under Cyclic Loading, Mechanics of Materials, DOI: 10.1016/j.mechmat.2015.10.009
  19. C. Arson, T. Vanorio, 2015. Chemo-mechanical evolution of pore space in carbonate microstructures upon dissolution: linking pore geometry to bulk elasticity, Journal of Geophysical Research, DOI: 10.1002/2015JB012087
  20. C. Zhu, A. Pouya, C. Arson, 2015. Micro-macro analysis and phenomenological modeling of salt viscous damage and application to salt caverns, Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-015-0832-9
  21. H. Xu, C. Arson, 2015. Mechanistic Analysis of Rock Damage Anisotropy and Rotation around Circular Cavities, Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-014-0707-5
  22. T. Ozudogru, G. Olgun, C. Arson, 2014. Analysis of friction-induced thermo-mechanical stresses on a heat exchanger pile in isothermal soil, Geotechnical and Geological Engineering, Special Issue: Thermo-hydro-mechanical behavior of soils and energy geostructures, DOI: 10.1007/s10706-014-9797-9
  23. G. Olgun, T. Ozudogru, C. Arson, 2014. Thermo-mechanical radial expansion of heat exchanger piles and possible effects on contact pressures at pile-soil interface, Géotechnique Letters, DOI: 10.1680/geolett.14.00018
  24. C. Arson, 2014. Generalized Stress Variables in Continuum Damage Mechanics, Mechanics Research Communications, DOI: 10.1016/j.mechrescom.2014.06.006
  25. C. Zhu, C. Arson, 2014. A model of damage and healing coupling halite thermo-mechanical behavior to microstructure evolution, Geotechnical and Geological Engineering, Special Issue: Thermohydro- mechanical behavior of soils and energy geostructures, DOI: 10.1007/s10706-014-9797-9
  26. E. Bakhtiary, H. Xu, C. Arson, 2014. Probabilistic Optimization of a Continuum Mechanics Model to Predict Differential Stress-Induced Damage in Claystone, International Journal of Rock Mechanics and Mining Sciences, 68, 136-149, DOI: 10.1016/j.ijrmms.2014.02.015i
  27. C. Arson, B. Juge, 2014. Homogenization of Cemented Soil Stiffness and Application to the Study of Arching Effects between Jet-Grouted Columns, KSCE Journal of Civil Engineering, 18, 7, DOI 10.1007/s12205-014-0511-5
  28. Z. Medina-Cetina, C. Arson, 2014. Probabilistic Calibration of a Damage Rock Mechanics Model, Géotechnique Letters, vol.4, pp.17-21, DOI: 10.1680/geolett.13.00059
  29. C. Arson, Z. Medina-Cetina, 2014. Bayesian Paradigm to Assess Rock Compression Damage Models, Environmental Geotechnics, DOI: 10.1680/envgeo.13.00039
  30. C. Zhu, C. Arson, 2014. A Thermo-Mechanical Damage Model for Rock Stiffness during Anisotropic Crack Opening and Closure, Acta Geotechnica, DOI: 10.1007/s11440-013-0281-0
  31. H. Xu, C. Arson, 2014. Anisotropic Damage Models for Geomaterials: Theoretical and Numerical Challenges, International Journal of Computational Methods, Special Issue on Computational Geomechanics, vol.11, n.2, DOI: 10.1142/S0219876213420073
  32. J.-M. Pereira, C. Arson, 2013. Retention and Permeability Properties of Damaged Porous Rocks, Computers & Geotechnics, vol.48, pp.272-282
  33. C. Arson, J.-M. Pereira, 2013. Influence of Damage on Pore Size Distribution and Permeability of Rocks, International Journal for Numerical and Analytical Methods in Geomechanics, vol.37, pp.810-831
  34. C. Arson, H. Xu, F.M. Chester, 2012. On The Definition Of Damage In Time-Dependent Healing Models For Salt Rock, Géotechnique Letters, vol.2, pp.67-71
  35. N. Dufour, H. Wong, C. Arson, F. Deleruyelle, J.-M. Pereira, 2012. A thermodynamically consistent framework for saturated viscoplastic rock-materials subject to damage, Mechanics Research Communications, vol.45, pp.15-21
  36. C. Arson, 2012. Using a geo-mechanical damage model to assess permeability in cracked porous media: internal length parameter issues, Special Topics & Reviews in Porous Media, vol.3, n.1, pp.69-77
  37. C. Arson, B. Gatmiri, 2012. Thermo-Hydro-Mechanical Modeling of Damage in Unsaturated Porous Media: Theoretical Framework and Numerical Study of the EDZ, International Journal for Numerical and Analytical Methods in Geomechanics, vol.36, pp.272-306
  38. C. Arson, B. Gatmiri, 2011. Numerical Study of Damage in Unsaturated Geological and Engineered Barriers, Physics and Chemistry of the Earth, vol.36, pp.1981-1989
  39. B. Gatmiri, S. Hemmati, C. Arson, E. Emirzehni, 2010. A Multiphase Analysis for Environmental Impact Assessment with Theta-Stock Finite Element Program, Journal of Multiscale Modelling, vol.2, n.1-2, pp. 23-68
  40. C. Arson, B. Gatmiri, 2010. Numerical study of a thermo-hydro-mechanical damage model for unsaturated porous media, Annals of Solid and Structural Mechanics, vol.1, n.2, pp. 59-78
  41. C. Arson, B. Gatmiri, 2009. A mixed damage model for unsaturated porous media, Comptes-Rendus de l'Académie des Sciences de Paris, section Mécanique, vol. 337, n.2, pp.68-74
  42. B. Gatmiri, P. Maghoul, C. Arson, 2009. Site-specific Spectral Response of Seismic Movement due to Geometrical and Geotechnical Characteristics of Sites, Soil Dynamics and Earthquake Engineering, vol.29, n.1, pp.51-70
  43. C. Arson, B. Gatmiri, 2008. Excavation damage in unsaturated porous media, Key Engineering Materials, Advances in Fracture and Damage Mechanics VII., vol.385-387, pp.137-140
  44. C. Arson, B. Gatmiri, 2008. On damage modelling in unsaturated clay rocks, Physics and Chemistry of the Earth, vol.33, pp. S407–S415
  45. B. Gatmiri, C. Arson, 2008. Theta-Stock, a powerful tool for thermohydromechanical behaviour and damage modelling of unsaturated porous media, Computers and Geotechnics, vol.35, n.6, pp. 890-915
  46. B. Gatmiri, C. Arson, 2008. Seismic site effects by an optimized 2D BE/FE method. II. Quantification of site effects in two-dimensional sedimentary valleys, Soil Dynamics and Earthquake Engineering, vol.28, n.8, pp.646-661
  47. B. Gatmiri, C. Arson, K.V. Nguyen, 2008. Seismic site effects by an optimized 2D BE/FE method. I. Theory, numerical optimization and application to topographical irregularities, Soil Dynamics and Earthquake Engineering, vol.28, n.8, pp.632-645

Books

  1. A. Bobet, C. Arson, D. Elsworth, Y. Fang, Z. Feng, Q. Gan, Y. Guglielmi, K. Im, T. Ishibashi, G.l Izadi, A. Modiriasa, P. Nelson, J. Pogacnik, J. Taron, I. Tomac, C. Wang, 2018. Rock Mechanics, in: Geotechnical Fundamentals for Addressing New World Challenges, P. Culligan, A. Whittle and J. Mitchell eds
  2. C. Arson, E. Berns, G. Akrouch, M. Sanchez, J.-L. Briaud, 2013. Chapter: "Heat Propagation around Geothermal Piles and Implications on Energy Balance", in: Energy Book Series - Volume # 1: “Materials and processes for energy: communicating current research and technological developments”, A. Méndez-Vilas ed., Formatex Research Center, ISBN(13): 978-84-939843-7-3, pp.628-635

Proceedings

  1. F. Anselmucci, E. Ando, L. Sibille, N. Lenoir, R. Peyroux, C. Arson, G. Viggiani,G. Bengough, 2019. Root-reinforced sand: kinetic response of the soil, IS-Glasgow 2019, 7th International Symposium on Deformation Characteristics of Geomaterials, Glasgow, UK, June 26-28, 2019.
  2. F. Anselmucci, E. Ando, L. Sibille, N. Lenoir, G. Viggiani, R. Peyroux, C. Arson, G. Bengough, 2018. Quantifying micro-structural changes in sand due to plant root growth, Bio-inspired and Bio-mediated Geotechnics workshop, ISSMGE conference, Atlanta, Sept.13, 2018.
  3. L.F. Patino-Ramirez, C. Arson, 2018. Numerical analysis of the plastic zone in drained soil around a pressurized cylindrical cavity under biaxial stress, IS Atlanta 2018, ISSMGE conference micro-to-macro geomechanics from theory to practice, Sept. 9-12, 2018.
  4. X. Shen, C. Arson, J. Ding, F. Chester, J. Chester, 2018. Discrete frictional wing crack based damage model for salt rock, IS Atlanta 2018, ISSMGE conference micro-to-macro-geomechanics from theory to practice, Sept. 9-12, 2018.
  5. J. Ding, F.M. Chester, J. Chester, X. Shen, C. Arson, 2017. Microcrack Network Development in Salt Rock During Cyclic Loading at Low Confining Pressure. 51st US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 25-28 2017, Paper 17-0308
  6. W. Jin, C. Arson, 2017. Modeling of tensile and compressive damage in layered sedimentary rock: a direction-dependent non-local model. 51st US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 25-28 2017, Paper 17-0108
  7. W. Jin, C. Arson, 2017. Non-local micromechanical anisotropic damage modeling of quasi-brittle materials: formulation and implementation. 51st US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 25-28 2017, Paper 17-0111
  8. F. Patino-Ramirez, C. Arson, 2017. Bio-inspired fluid extraction model for reservoir rocks. 51st US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 25-28 2017, Paper 17-0515
  9. X. Shen, C. Arson, J. Ding, F.M. Chester, J. Chester, 2017. Experimental characterization of microstructure development for calculating fabric and stiffness tensors in salt rock. 51st US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 25-28 2017, Paper 17-0568
  10. P. Wang, C. Arson, 2017. A method to estimate the energy distribution during the confined comminution of granular materials. 51st US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 25-28 2017, Paper 17-0470
  11. C. Zhu, X. Shen, C. Arson, A. Pouya, 2017. Numerical study of thermo-mechanical effects on the viscous damage behavior of rock salt caverns. 51st US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 25-28 2017, Paper 17-0353
  12. X. Shen, C. Zhu, C. Arson, 2017. Analysis of microstructure, deformation and permeability of salt/sand mixtures during creep, 6th Biot Conference on Poromechanics, Paris, France, 9-13 July 2017
  13. R. Jeanneret, C. Arson, E. Vennat, 2017. Homogenization of dentin elastic properties based on microstructure characterization, statistical back-analysis and FEM simulation, 6th Biot Conference on Poromechanics, Paris, France, 9-13 July 2017
  14. J.H. Ding, F.M. Chester, J.S. Chester, C. Zhu, C. Arson, 2016. Mechanical behavior and microstructure development in consolidation of nominally dry granular salt. 50th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, Houston, TX, 26-29 June 2016 (in press)
  15. W. Jin, C. Arson, S. Busetti, 2016. Simulation of mode II unconstrained fracture path formation coupled with anisotropic damage propagation in shale. 50th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, Houston, TX, 26-29 June 2016 (in press)
  16. X. Shen, C. Zhu, C. Arson, 2016. Chemo-mechanical damage and healing of granular salt: micromacro modeling. 50th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, Houston, TX, 26-29 June 2016 (in press)
  17. P. Wang, C. Arson, 2016. Breakage mechanics modeling of the brittle-ductile transition in granular materials. 50th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, Houston, TX, 26-29 June 2016 (in press)
  18. C. Zhu, C. Arson, 2016. Damage and healing model of stiffness and permeability for salt rock: microstructure imaging, fabric processes and continuum mechanics. 50th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, Houston, TX, 26-29 June 2016 (in press)
  19. C. Zhu, A. Pouya, C. Arson, J.H. Ding, F.M. Chester, J.S. Chester, 2016. Micro-mechanical analysis of salt creep tests with a joint-enriched Finite Element model. 50th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, Houston, TX, 26-29 June 2016 (in press)
  20. W. Jin, C. Zhu, C. Arson, A. Pouya, 2015. Numerical study of the influence of fluid viscosity on wellbore spalling in drained fractured rock. 49th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 28 – July 1st 2015, 9p.
  21. P. Wang, E. Bakhtiary, T. Christopher, K. Francis, S. Ecker, C. Arson, 2015. Discrete Element modeling and analysis of shielding effects during the crushing of a grain. 49th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 28 – July 1st 2015, 6p.
  22. C. Zhu, C. Arson, 2015. Fabric-enriched Modeling of Anisotropic Healing induced by Diffusion in Granular Salt. 49th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, June 28 – July 1st 2015, 10p.
  23. C. Zhu, C. Arson, Fabric-based modeling of thermo-mechanical damage and healing around salt caverns, Mechanical Behavior of Salt VIII, Rapid City, South Dakota, 26-28 May 2015
  24. C. Zhu, C. Arson, A. Pouya, Theoretical study of damage accommodation in salt subject to viscous fatigue, Mechanical Behavior of Salt VIII, Rapid City, South Dakota, 26-28 May 2015
  25. C. Zhu, S.H. Jeong, M. Dutta, C. Arson, Image Processing of Fabric Evolution in Granular Salt subject to Diffusive Mass Transfer, Mechanical Behavior of Salt VIII, Rapid City, South Dakota, 26-28 May 2015
  26. W. Jin, H. Xu, C. Arson, 2015. Energy Dissipation During Mode I Fracture Propagation in Shale: Comparison between a Continuum Damage Model, a Cohesive Zone Model and the Extended Finite Element Method, ISRM Congress 2015, Shale Symposium, Montréal, Canada, 10-13 May 2015
  27. W. Jin, H. Xu, C. Arson, 2015. Finite Element Simulation of Anisotropic Damage Around Pressurized Boreholes in Prefactured Shale, ISRM Congress 2015, Shale Symposium, Montréal, Canada, 10-13 May 2015
  28. D. Scott, S.-H. Lee, E. Bakhtiary, C. Arson, D. White, 2015. Static Response Of Steel Guardrail Posts Driven Through Asphalt Vegetation Barriers, Transportation Research Board 94th Annual Meeting, Washington D.C., 11-15 January, 2015
  29. A. Pouya, C. Zhu, C. Arson, 2014. Micro-Macro Modeling Approach for the Triggering of Viscous Fatigue Damage in Halite Polycrystals under Cyclic Loading, 48th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, Minneapolis, MN, 1-4 June 2014, paper ID: 14-6949
  30. C. Zhu, C. Arson, 2014. Using Microstructure Descriptors to Model Thermo-mechanical Damage and Healing in Salt Rock, 48th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, Minneapolis, MN, 1-4 June 2014, paper ID: 14-6959
  31. C. Arson, J.C. Santamarina, 2014. Bio-Inspired Porous Network Topology for Optimal Injection and Withdrawal Processes in Soils, GeoCongress 2014: Geo-Characterization and Modeling for Sustainability, Atlanta, GA, 23-26 February 2014
  32. E. Bakhtiary, C. Arson, 2014. Micro-macro Modeling of Particle Crushing Based on Branch Lengths, GeoCongress 2014: Geo-Characterization and Modeling for Sustainability, Atlanta, GA, 23-26 February 2014
  33. H. Xu, C. Arson, S. Busetti, 2014. Multi-scale Discontinuities Due to Differential Stress Around a Pressurized Borehole, GeoCongress 2014: Geo-Characterization and Modeling for Sustainability, Atlanta, GA, 23-26 February 2014
  34. C. Zhu, C. Arson, 2014. Theoretical Bases of A Thermo-Mechanical Damage and DMT-Healing Model for Rock, GeoCongress 2014: Geo-Characterization and Modeling for Sustainability, Atlanta, GA, 23-26 February 2014
  35. C. Arson, J.-M. Pereira, 2013. Rock Stiffness and Permeability During Crack Opening and Closure: A Planar Transverse Isotropic (PTI) Model Using Pore size Distributions (PSD), 5th Biot Conference on Poromechanics, Vienna, Austria, 10-12 July, 2013, p.2270-2279
  36. S. Le Pense, C. Arson, B. Gatmiri, A. Pouya, 2013. Simulation of the Unsaturated Excavation Damage Zone Around a Tunnel Using A Fully Coupled Damage-Plasticity Model, 5th Biot Conference on Poromechanics, Vienna, Austria, 10-12 July, 2013, p.2556-2565
  37. H. Xu, C. Arson, 2013. Modeling Damage Induced by Deviatoric Stress in Rock: Theoretical Framework, 5th Biot Conference on Poromechanics, Vienna, Austria, 10-12 July, 2013, p.2546- 2555
  38. I. Yousfi, Z. Lafhaj, C. Arson, 2013. Heat Damaged Cement Paste Characterization Using Non- Linear Acoustic Waves, 5th Biot Conference on Poromechanics, Vienna, Austria, 10-12 July, 2013, p.2536-2545
  39. C. Zhu, C. Arson, 2013. Modeling the Influence of Thermo-Mechanical Crack Opening and Closure on Rock Stiffness, 5th Biot Conference on Poromechanics, Vienna, Austria, 10-12 July, 2013, p.2526-2535
  40. E. Bakhtiary, C. Arson, 2013. Towards a Thermodynamic Framework to Model Particle Crushing and Sieving, 47th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, 23-25 June 2013, paper ID: 13-348, 8p.
  41. S. Johnson, C. Arson, R. Settgast, 2013. Multi-Scale Fracture Creation and Network Generation During Hydraulic Fracturing, 47th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, 23-25 June 2013, paper ID: 13-584, 12p.
  42. H. Xu, C. Arson, S. Busetti, 2013. Modeling the Anisotropic Damaged Zone Around Hydraulic Fractures: Thermodynamic Framework and Simulation of Mechanical Tests, 47th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, 23-25 June 2013, paper ID: 13-375, 10p.
  43. C. Zhu, C. Arson, H. Xu, 2013. Modeling Stiffness Anisotropy Induced by Crack Opening in Rocks Subjected to Thermal versus Mechanical Stress Gradients, 47th US Rock Mechanics/Geomechanics Symposium of the American Rock Mechanics Association, San Francisco, CA, 23-25 June 2013, paper ID: 13-305, 8p.
  44. H. Xu, C. Arson, F. Chester, 2012. Stiffness and Deformation of Rock Subjected to Anisotropic Damage and Temperature-Dependent Healing, 46th U.S. Rock Mechanics and Geomechanics Symposium, Chicago, Illinois, USA, June 24-27, 2012, Paper 12-316, 8 p.
  45. H. Xu, C. Arson, 2012. Thermo-Mechanical Damage in Porous Rocks: Theoretical Framework and Modeling Considerations, GeoCongress 2012, State of the Art and Practice in Geotechnical Engineering, Oakland, California, USA,  
  46. C. Arson, B. Juge, 2012. A Hollow Sphere Model to Dimension Soilcrete Columns, GeoCongress 2012, State of the Art and Practice in Geotechnical Engineering, Oakland, California, USA,  
  47. M. Mozayan, C. Arson, B. Gatmiri, 2011. Thermal damage in unsaturated geomaterials, Unsaturated Soils – Proc. of the Fifth International Conference on Unsaturated Soils, Barcelona, Spain, 6-8 September 2010, Taylor & Francis Group, Alonso & Gens eds, pp.585-588
  48. M. Mozayan, C. Arson, B. Gatmiri, 2010. Study of tensorial damage in a porous geomaterial, 7th Eur. Conf. on Num. Methods in Geotech. Engineering, Trondheim, Norway, 2-4 June 2010, 6p.
  49. C. Arson, B. Gatmiri, 2009. Numerical study of a new THM damage model for unsaturated geomaterials, in Unsaturated Soils – Theoretical and Numerical Advances in Unsaturated Soil Mechanics, proc. 4th Asia-Pacific Conference on Unsaturated Soils, New-Castle, Australia, 23-25 November 2009, CRC Press, Buzzi et al. editors, p.635-640
  50. C. Arson, B. Gatmiri, 2009. Damage in unsaturated porous media: theory, algorithm and numerical application, in Poromechanics IV, Proceedings of the 4th Biot Conference on Poromechanics, Columbia University, New-York, USA, 8 - 10 June, 2009, Ling, Smyth and Betti eds, DESTech Publications, p. 214-219
  51. C. Arson, B. Gatmiri, 2009. Parametric study on the performance of a THM damage model for unsaturated porous media, 1st International Symposium on Computational Geomechanics, Juanles- Pins, France, 29 April - 1st May 2009, pp. 553-562
  52. C. Arson, B. Gatmiri, 2008. Outline of the modelling of the excavated damaged zone in geological barriers, First European Conference on Unsaturated Soils, Durham, United Kingdom, 2 - 4 July 2008, Unsaturated Soils, Advances in Geo-Engineering, CRC Press, eds: D.G. Toll, C.E. Augarde, D. Gallipoli, S.J. Wheeler, pp. 695-701
  53. C. Arson, B. Gatmiri, 2007. Quantitative prediction of 2D topographical and sedimentary site effects by an optimised hybrid numerical technique, 7ème Colloque National de l'Association Française du Génie Para-Sismique, Paris, France, 4 - 6 July 2007, communication n. A005, 8 p.
  54. C. Arson, B. Gatmiri, 2007. Quantification of seismic site effects in two-dimensional irregular configurations, 4th International Conference on Earthquake Geotechnical Engineering, Thessaloniki, Greece, 25 - 28 June 2007, communication n. 1195, 12 p.
  55. C. Arson, B. Gatmiri, 2007. Quantitative prediction of site effects in sedimentary valleys by an optimised 2D hybrid method, 5th International Conference on Seismology and Earthquake Engineering, Tehran, Iran, 13 - 16 May 2007, session SE, n.3, 9 p.

Updated date: April 29, 2019 - 00:03